GET IP OF REMOTE SYSTEM WHILE CHATTING.

This is a tutorial on how to get IP address from any messenger.This is really easy thing to do.
The IP address is only given when you accept or are sending a file through MSN messenger. When you send IM's, the message is sent through the server thus hiding your victims IP and your. But when you send a file or receive a file, it is direct connection between the two computers.
To obtain the IP accept a file transfer or send a file to the victim, when the file sending is under way from the dos prompt type "netstat" without the quotation marks.You should get a table like this:
Proto Local Address Foreign Address StateTCP kick:1033 msgr-ns29.msgr.hotmail.com:1863 ESTABLISHED TCP kick:1040 msgr-sb36.msgr.hotmail.com:1863 ESTABLISHED TCP kick: ESTABLISHED
The top name in the list is the server's address for IMing. There could be many ofthe second name in the list, as a new connection is made to the server for every room you are IMing to. You are looking for the address of the remote host inthis table it may be something similar to "host63-7-102-226.ppp.cal.vsnl.com" or “203..64.90.6”.without the quotation marks.All you need to do now is to put this address in you IP lookup programe and get the IP of the remote system.
Well 50%of the work is done now. Now you know how to get the IP of a remote system, so its time to trace it down and find some details about the IP.

Tracing an IP is quite simple. You can do it the easy way by using some softwares like Visual Trace 6.0b[ftp://ftp.visualware.com/pub/vr/vr.exe]
or you do it another way ie. Using MS DOS or any other version of DOS.
Well I suggest you to use DOS and its tracert tool for tracing the IP cause using it will give you a clear conception about the art of tracing an IP and I guarantee that you will feel much satisfied on success than using a silly software. Furthur you will know how things work and how the IP is traced down and the different networks associated in this tracing process.

Let us take a look at tracert tool provided for DOS by Microsoft.
It is a very handy tool for peoples need to trace down an IP.
Just open any DOS windows and type tracert.

C:\windows>tracert

Usage: tracert [-d] [-h maximum_hops] [-j host-list] [-w timeout] target_name
Options:
-d Do not resolve addresses to hostnames.
-h maximum_hops Maximum number of hops to search for target.
-j host-list Loose source route along host-list.
-w timeout Wait timeout milliseconds for each reply.
You will now see a description of the tracert command and the switches associated with it.
Well these switches doesn’t makes much difference. All you can do is to increase the timeout in milliseconds by using –w switch if you are using a slow connection and the –d switch if you wish not resolve address to hostnames by default.
By default tracert performs a maximum of 30 hops trace. Using the –h switch you can specify the number of hops to perform.
Now its time for execution.
Let us trace down the IP yahoo.com [216.115.108.243]

If you have done a long research (I mean a lot) then simply looking at the IP you can figure out some info from it. For example the IP 203.90.68.8 indicates that the system is in India. In India IPs generally begin with 203 and 202

C:\WINDOWS>tracert yahoo.com

Tracing route to yahoo.com [216.115.108.243] over a maximum of 30 hops:

1 308 ms 142 ms 127 ms 203.94.246.35
2 140 ms 135 ms * 203.94.246.1
3 213 ms 134 ms 132 ms 203.94.255.33
4 134 ms 130 ms 129 ms 203.200.64.29
5 122 ms 135 ms 131 ms 203.200.87.75
6 141 ms 137 ms 121 ms 203.200.87.15
7 143 ms 170 ms 154 ms vsb-delhi-stm1.Bbone.vsnl.net.in [202.54.2.241]
8 565 ms 589 ms 568 ms if-7-0.bb8.NewYork.Teleglobe.net [207.45.198.65]
9 596 ms 584 ms 600 ms if-3-0.core2.NewYork.teleglobe.net [207.45.221.66]
10 * * * Request timed out.
11 703 ms 701 ms 719 ms if-3-0.core2.PaloAlto.Teleglobe.net [64.86.83.205]
12 694 ms 683 ms 681 ms if-6-1.core1.PaloAlto.Teleglobe.net [207.45.202.33]
13 656 ms 677 ms 700 ms ix-5-0.core1.PaloAlto.Teleglobe.net [207.45.196.90]
14 667 ms 673 ms 673 ms ge-1-3-0.msr1.pao.yahoo.com [216.115.100.150]
15 653 ms 673 ms 673 ms vl20.bas1.snv.yahoo.com [216.115.100.225]
16 666 ms 676 ms 674 ms yahoo.com [216.115.108.243]
Trace complete.

Here I have traced yahoo.com. In place of yahoo.com you can give the IP of yahoo or any other IP you want to trace, the result will be the same.

Now carefully looking at the results you can figure out many information about yahoo’s server [216.115.108.243]
First packets of data leave my ISP which is at 203.94.246.35 .Similarly you can find out the different routers through which the packets of data are send and received to and from the target system. Now take a look at the 13th line you’ll see that the router is in PaloAlto.Teleglobe.net from this you can easily figure out that the router is in Palo Alto. Now finally look at the target system ie. Yahoo’s server vl20.bas1.snv.yahoo.com . Now you got the address of yahoo’s server. Now put this address in any IP lookup programe and perform and reverse DNS lookup and you will get most of the info about this address,like the place where it is in.
Well another thing you can find out using the tracert tool is that the number of hops (routers) the target system is away from you. In case of tracerouting yahoo.com we find that the target system ie yahoo’s server is 16 hops away from my system. This indicates that there are 16 routers between my system and yahoo’s server.

Apart from tracing an IP you can find out many usefull details about the target system using the tracert tool.